Oven, Stove & Range Repair in Temple, TX
An oven that will not heat almost always has one of three problems: a burned-out bake element, a gas igniter too weak to open the valve, or a temperature sensor that has drifted. Oven, stove and range repair in Temple, TX covers freestanding and slide-in ranges, wall ovens and cooktops, electric and gas, including the door lock that sticks right after a self-clean.
Free callCall, choose the appliance, and enter your ZIP code.
- Free to call
- Technicians across Bell County
- All major appliance brands
- Temple & Bell County
Expect a technician to test before replacing: an element’s resistance, the current an igniter draws, a sensor’s reading against the oven’s temperature. Those checks separate a cheap part from a control board, and they tell you whether calibration alone might fix a range that bakes unevenly. Agree to the repair only after you hear what failed.
Oven repair, stove repair and range repair are the same visit in practice. A range is an oven and a cooktop in one cabinet, and a gas stove repair often comes down to the same few igniters, switches and valves whether the problem is in the oven or on a burner. Electric ovens and glass-top stoves have their own short list of elements, switches and sensors.
Some range problems cannot wait. An oven that will not turn off, a burner stuck on high, a burning electrical smell or sparks call for emergency oven and stove repair; say it is urgent when you call. If you smell gas, get out of the house and call the gas utility from outside before anything else.
Safety
Smell gas or see sparks? Stop here first
Most oven and stove problems are an inconvenience. These are not.
- You smell gas: do not turn anything on or off. Leave the house and call your gas utility from outside.
- Sparks, arcing or a flash from a burner, element or the back of the range.
- A burning plastic or electrical smell that is not food.
- A glass cooktop that is cracked through. Stop using that surface.
- The breaker trips when the oven or a burner turns on.
Gas valves, regulators and gas line connections are not do-it-yourself jobs.
Oven problems and cooktop problems come from different parts
Say which part of the range is acting up when you call. It changes what the technician brings.
Inside the oven
- Bake and broil elements on electric ovens
- Hot surface igniter and gas safety valve on gas ovens
- Temperature sensor and control board
- Convection fan and its motor
- Door lock assembly on self-clean ovens
On the cooktop
- Coil elements and their receptacles
- Radiant elements under a glass top
- Infinite switches behind the knobs
- Spark igniters and the spark module on gas burners
- Burner caps and heads that sit out of place
Symptom checker
Common oven and stove problems in Temple homes
Tap the one that sounds like your oven or stove to see the usual cause.
01Oven won’t heat
Electric ovens: a burned bake element (you can often see a break or blister on it), a failed relay or a control board fault. Gas ovens: a weak igniter is the most common cause. It glows, but not hot enough to open the gas valve.
Bake elements and igniters are some of the most common oven parts.
02Takes forever to preheat
On gas ovens, a weakening igniter opens the valve late, so the burner lights slowly or cycles badly. On electric ovens, a failing bake element or a broil element that has quit can stretch preheat times.
An igniter or element replacement usually brings preheat back to normal.
03Wrong temperature or uneven baking
A temperature sensor that has drifted, a failing element, or a convection fan that stopped. Many ovens also allow calibration, which a technician can check.
Sensor replacement or recalibration usually solves it.
04Gas burner clicks but won’t light
A spill on the igniter, a burner cap out of place, a wet spark module or a cracked igniter. Clicking that continues after the burner lights usually means moisture or a bad switch.
Cleaning, igniter or switch replacement.
05Electric burner not heating or stuck on high
A bad coil element or a burned receptacle on coil tops. On glass tops, a failed radiant element or an infinite switch that is stuck.
Elements, receptacles and switches are standard parts.
06Door locked after self-clean
The door lock motor or switch has failed, or the control did not detect that the oven cooled down. It often shows up right after a self-clean cycle.
Door lock assemblies are replaceable.
07Error code or dead display
Codes often point to a sensor or door lock fault. A completely dead display can be a tripped breaker, a blown fuse, a power supply problem or a control board failure.
Ask the technician to test the board before replacing it.
Free call
Call about your oven or stove
(254) 615-2088Call, choose the appliance, and enter your ZIP code.
- Say what your oven or stove is doing and the brand.
- Your call goes to a technician who works in your area.
- Settle the timing and the price before any work starts.
Urgent leak or no cooling? Say so when you call.
Quick answer
Is your oven running hot or cold? A simple test
Oven dials are often off by a little. Here is how to see by how much.
- 1Put an oven thermometer in the center of the middle rack.
- 2Set the oven to 350°F and let it run for about 20 minutes after it says it is preheated.
- 3Read the thermometer without opening the door if you can. Ovens swing a few degrees above and below the setting as they cycle, which is normal.
- 4Take two or three readings a few minutes apart and average them.
- 5If the average is more than about 25 degrees off, call for repair. It may be a calibration setting, a sensor or a heating part.
Emergency oven & stove repair
Emergency oven and stove repair in Temple
A range that will not shut off or smells like burning wiring is a fire risk, not an inconvenience. Shut off the power or gas first, then check the signs below.
Oven will not turn off
The oven keeps heating after it is switched off, or runs far hotter than the setting.
Burner stuck on high
A coil or glass-top burner stays on full heat no matter where the knob is set.
Sparks or burning wiring smell
Arcing at an element, a flash from a burner, or an electrical smell from the back of the range.
Gas smell
Do not switch anything on or off. Leave the house and call your gas utility from outside, then call for repair.
Shut it down safely
- 1Switch off the breaker for the range, unless you smell gas.
- 2On a gas range, close the gas supply valve behind it if you can reach it safely.
- 3Keep the oven door closed and let everything cool.
- 4Write down the brand, model number, gas or electric and any error code, then call.
Emergency help for an oven that will not shut off or a burner stuck on high may be available from local providers; say so as soon as the call connects.
Why a glowing igniter can still be the problem
Most gas ovens use a hot surface igniter wired in line with the gas safety valve. The valve only opens when enough current flows through the igniter. As an igniter ages, it can still glow orange while drawing too little current to open the valve, so the oven never lights or lights late.
That is why a good technician tests the igniter with a meter before blaming the valve or the control board. It is usually the less involved repair, so ask about it.
Self-clean cycles: what to know before you press the button
A self-clean cycle heats the oven far above normal baking temperatures for a few hours to burn off spills. That heat is hard on parts that are already worn. Door locks, temperature sensors, thermal fuses and control boards often fail during or right after a self-clean, which is why so many oven calls start with "it was fine until I cleaned it."
If your oven is older or already acting up, wipe out loose spills by hand and skip the self-clean for now. Remove the racks unless your manual says they can stay, keep the kitchen ventilated, and do not try to force the door open while it is locked. If the lock does not release after the oven has cooled for a few hours, call and say it stuck after a self-clean.
Check your anti-tip bracket
Freestanding ranges are built to be secured with an anti-tip bracket at the back foot. Without it, the weight of a child standing on an open oven door can tip the range forward, along with whatever is cooking on top. If your range has been moved for cleaning or flooring, the bracket may no longer be engaged. Ask the technician to check it during a repair visit.
What to expect on an oven or stove repair visit
- Step 1
Check power or gas
A technician will usually confirm the range has power or gas supply before testing parts.
- Step 2
Test the heat source
Elements, igniters, switches and the temperature sensor are usually tested with a meter.
- Step 3
Explain and approve
Ask what failed and what the repair involves. Give the go-ahead only once that is clear.
- Step 4
Repair and verify
After the repair, ask for the oven or burner to be run to confirm it heats correctly.
Oven not heating
Oven not heating? What the symptom points to
How the oven fails narrows down the part. Note which of these matches yours before you call.
You see
Gas oven: igniter glows, no flame
The igniter is too weak to open the gas valve, or less often the valve itself has failed.
The igniter is tested with a meter first; it is the most common gas oven repair.
You see
Electric oven: broil works, bake does not
The bake element has burned out. You can often see a break or a blister on it.
Bake element replacement is a routine oven repair.
You see
Heats, but bakes too hot or too cold
The temperature sensor has drifted or the oven needs calibration.
Run the thermometer test above; calibration or a new sensor fixes most cases.
You see
Nothing heats and the display is dead
A tripped breaker, a blown thermal fuse or a control board fault.
Check both breakers first; the fuse and board are tested before anything is replaced.
Ranges, wall ovens and cooktops in Temple kitchens
Freestanding ranges are the most common setup in Temple kitchens, with the oven below and four or five burners on top. Slide-in ranges sit flush with the counter and put the controls on the front, which changes how the technician reaches the wiring and switches.
Wall ovens, single or double, are built into the cabinets and pair with a separate cooktop. They need more care to pull out, so give the model number when you call. Gas cooktops use spark igniters and burner valves, and electric cooktops use coil elements or radiant elements under a glass top, each with its own switch.
Whatever the setup, a good oven and stove repair starts the same way: confirm power or gas, test the heat source and the controls, and explain the fix before any work starts.
Repair or replace your range?
Ranges and ovens last a long time, often 13 to 15 years. Elements, igniters, sensors, switches and door locks are straightforward to replace. A cracked glass cooktop or a control board that is no longer made are the main reasons to weigh replacement.
Wall ovens and slide-in ranges deserve extra thought, because replacing them can mean cabinet changes. In most cases, repair is the simpler path for those.
- Element, igniter, sensor or switch failure: repair
- Cracked glass top on an older range: compare against a new range
- Wall ovens and slide-in ranges: repair usually makes more sense
Oven, range and cooktop brands
GE and Frigidaire ranges are a common sight in Temple builder homes, with Whirlpool, Samsung, LG and KitchenAid in newer kitchens. Give the brand, model number and whether it is gas or electric when you call.
- Freestanding ranges
- Slide-in ranges
- Wall ovens
- Cooktops
- Electric and gas
Appliance Repair Temple is not affiliated with GE, Whirlpool or any other oven or stove manufacturer. Brand names are listed to describe the appliances technicians work on.
Oven & Stove repair questions
Why does my gas oven take so long to heat?
A weak igniter is the usual cause. It still glows, but it does not draw enough current to open the gas safety valve quickly, so the oven heats slowly or not at all.
My oven runs 25 degrees off. Can that be fixed?
Often it can be calibrated from the control panel. If the temperature sensor has drifted too far, replacing it brings the oven back in line.
Can glass-top stoves be repaired?
Yes, including radiant elements and infinite switches. A cracked glass top can be replaced on many models, though on an older range a new range may make more sense.
Is it safe to use the stovetop while the oven is broken?
Usually, if the problem is limited to the oven. If anything smells like gas or burning wiring, stop using the whole range and have it checked first.
Can wall ovens and cooktops be repaired?
Yes. Built-in wall ovens and drop-in cooktops are regular repair calls in Temple. Give the model number when you call so the technician can plan for the access.
Can I get emergency oven and stove repair in Temple?
Emergency oven and stove repair calls are about heat and gas. Call and say it is urgent if the oven will not turn off, a burner is stuck on high, or you see sparks or smell burning wiring. Switch off the breaker for the range first. If you smell gas, leave the house and call your gas utility from outside before anything else.
When is an oven or stove problem an emergency?
An oven that will not turn off, a burner stuck on high, sparks or a burning wiring smell are emergencies. So is any gas smell, but that call goes to 911 or the gas company first, from outside. An oven that simply will not heat is not an emergency.
My oven will not turn off. What should I do?
Switch off the breaker for the range. On a gas range, also turn off the gas supply valve behind it if you can reach it safely. Keep the door closed and let the oven cool. An oven that keeps heating after it is switched off usually has a stuck relay on the control board or a failed switch, and it should not be used until it is checked.
Why is my oven not heating but the broiler works?
On an electric oven, the bake element has most likely burned out. On a gas oven with a separate broil burner, the bake igniter is the usual cause. Both are common oven repairs.
Why does my gas stove keep clicking?
Clicking that does not stop usually means moisture or a spill around a burner, a burner cap out of place, or a switch behind a knob that has failed. Let a wet cooktop dry fully and reseat the caps. If the clicking continues, the spark switch or spark module needs to be replaced.
Is oven and stove repair available outside Temple?
Yes. Oven, stove and range calls also come from Belton, Killeen, Harker Heights, Nolanville, Morgan’s Point Resort, Salado, Troy, Little River-Academy, Rogers, Holland and Moody, gas and electric alike.
How much does oven or stove repair cost?
A new igniter and a replacement glass cooktop are very different jobs, so this site does not list prices. Ask about cost and any warranty on the part before the range is moved, and have the brand, the model number and whether it is gas or electric ready.
Where is the model number on my range?
Pull out the storage drawer or open the oven door and look along the frame. On wall ovens and cooktops, check the frame edge or the underside. A photo of the rating plate is fine.
Questions to ask the technician before the oven or stove repair starts
- Is there a charge to diagnose the oven or stove, and does it go toward the repair?
- Can you show me proof of license and insurance for this kind of work?
- What failed on the oven or stove, what will the repair involve, and what will it cost before you start?
- Is there a warranty on the part and on the labor, and how long does it last?
- Is the anti-tip bracket engaged, and can it be checked before the range goes back in place?
Oven cold at dinner time? Call about the range.
Say gas or electric, and whether the problem is in the oven or on the cooktop. Ask about cost and any warranty on the part before the range is moved.
Call, choose the appliance, and enter your ZIP code.
- Free to call
- Technicians across Bell County
- All major appliance brands
- Temple & Bell County
Free call
Call Appliance Repair Temple
(254) 615-2088Call, choose the appliance, and enter your ZIP code.
- Say what your oven or stove is doing and the brand.
- Your call goes to a technician who works in your area.
- Settle the timing and the price before any work starts.
Urgent leak or no cooling? Say so when you call.